Description

AZDEN VHF WIRELESS LAPEL

Azden's WMS-PRO wireless microphone system offers untethered convenience and clear FM transmission from compact, unobtrusive components. The system consists of Azden's WM-PRO transmitter, WR-PRO receiver, EX-503 clip-on electret microphone, and EX-413 handheld microphone. Affix the electret microphone to your lapel or grasp the handheld mic, plug the mic cord into the transmitter, and away you go. The transmitter and receiver operate in the VHF band, where interference is very low. Choose between 169.445 MHz and 170.245 MHz for the clearest transmission and reception. The transmitter and receiver each operates for about 10 continuous hours on a single 9V battery (not included). The receiver comes with an attached shoe mount for mounting a video camera, which may be easily removed using a Philips-head screwdriver. You can also attach the receiver with the supplied Velcro strip. The receiver includes an output jack and a telescopic antenna. Plug the supplied earphone into the jack to monitor your recording, or plug the earphone into a camera's earphone jack. The system conforms to Part 90 of FCC rules, and it's not to be used in high temperatures, high humidity, or near a broadcasting station, airport, or on an airplane. What's in the Box WM-PRO transmitter, WR-PRO receiver, EX-503 lapel microphone, EX-413 handheld microphone, a camera shoe mount, a monaural earphone, a Velcro strip, and a user's manual/spec sheet.

Features

• LEDs on transmitter and receiver confirm system status
• Ear-phone included to monitor sound being recorded and receiver plugs into camera?s external microphone jack
• Both units use 1 AA battery
• System includes: WR-PRO receiver, WM-PRO belt-pack transmitter, lavaliere electret condenser microphone and hand-held electret condenser microphone

Description

AZDEN PRO LAPEL MIC &

Designed for use with Azden's WR-PRO receiver from the WHX-PRO wireless transmission system, the WLT-PRO microphone and transmitter bundle offers wireless convenience and clear FM transmission from compact, unobtrusive components. Affix the lavalier condenser to your lapel, plug the mic cord into the transmitter, and away you go. The mic cord doubles as the transmitter's antenna. Use the supplied belt clip to hook the transmitter to your waist, or just stuff the unit (which is smaller than a deck of cards) in a convenient pocket. The system and the transmitter itself operate in the VHF band, where interference is very low. Choose between 169.445 MHz and 170.245 MHz for the clearest transmission and reception. The system conforms to Part 90 of FCC rules, and it's not to be used in high temperatures, high humidity, or near a broadcasting station, airport, or on an airplane. What's in the Box EX-503 lapel microphone, WM-PRO transmitter, belt clip, and user's manual/spec sheet.

Features

• Wireless lapel microphone and transmitter for use with any Pro Series receiver
• 2 switchable VHF frequencies to choose the clearest sound
• Range of over 250'
• Belt clip-on transmitter
• Requires Pro Series receiver

Description

A complete system which includes the WL/T-PRO a belt-pack transmitter (WM-PRO) with electret condenser lavalier microphone (EX-503) and the WR-PRO receiver which comes with both shoe-mount and hook and loop fastener.All receivers and transmitters in the "PRO" Series are on the same 2 frequencies (169.445MHz and 170.245MHz).

Features

• LEDs on transmitter and receiver to confirm system status. Earphone included to monitor sound that is being recorded. Receiver plugs into camera's external microphone jack. Both units use one 9V battery each. Includes WR-PRO receiver, WM-PRO belt-pack transmitter, and lavaliere electret condenser microphone.

Description

This minature 3-channel microphone mixer allows you to add and mix sound from 3 microphone sources simultaneously. Only 3 1/4" x 1/4" x 2 1/8", it weighs 3 ounces, uses no batteries, and can be attached to the camcorder or the handstrap.

Features

• Mix sound as you shoot from 3 external mics
• Attached to camcorder or hand-strap
• 3 1?4" x 2 1?8", weighs 3 ounces
• No batteries required

Description

A complete system which includes the WM/T-PRO self-contained handheld microphone/transmitter, and the WR-PRO receiver, which comes with both a shoe-mount and velcro. Standby switch on the microphone allows you to pass it around without "touch" noise.

Features

• LEDs on transmitter and receiver to confirm system status
• Earphone included to monitor sound being recorded
• Receiver plugs into cameras external microphone jack
• Both units use 1 AA battery
• System includes: WR-PRO receiver and WHT-PRO hand-held microphone with built-in transmitter

Description

Audio-Technica’s PRO 88W VHF wireless microphone systems are designed for camcorder and other applications requiring a small, easily portable wireless. Equipped with a flexible detachable antenna and a choice of two transmitter and receiver frequencies on each system, the small and inconspicuous VHF wireless system will mount on the light shoe of camcorders or on the back of a camera itself with a Velcro attachment. For fixed installations, a 9V DC input is available on the receiver. Eight VHF channels are available for interference-free operation in virtually any location.

Features

• Provides freedom of movement for video production, computer applications and business presentations
• Two switchable frequencies for interference-free operation
• High-band VHF operation for superior sound
• Normal operating range 100'; up to 300' under optimum conditions
• Durable, flexible antenna can be positioned for best reception
• Durable, flexible antenna can be positioned for bestreception

Description

Now you can record in stereo directly with Azden's SMX-10. The 177mm long, dual uni-directional, electret-condensor mic is powered by a single AAA battery (not included) and features a built-in cable with a 3.5mm stereo mini plug. Main FeaturesManufacturer: Azden CorporationManufacturer Part Number: SMX-10Manufacturer Website Address: www.azdencorp.comProduct Type: MicrophoneConnectivity Technology: CableMicrophone Technology: ElectretMicrophone Type: DetachableDimensions: 6.97 Length x 0.72 DiameterWeight: 1.83 oz - Without battery

Perfect for use with smaller, high-end camcorder, the Azden SMX-10 compact shotgun microphone records in stereo and is powered by a single AAA battery that provides up to 400 hours of continuous use. This dual uni-directional, electret-condensor mic measures 7 inches long with a 0.7-inch diameter, and it weighs just 1.83 ounces (without battery). It includes a permanently attached coiled cable coming out the back that plugs into 1/8-inch (3.5mm) jacks. Other features include a foam windscreen, lo-cut switch to minimize rumble and wind noise, and camera hot-shoe mount. Specifications Type: Stereo electret condenser Frequency response: 100-18,000Hz Sensitivity: -40dB @1kHz (1V/Pa) Output impedance: 1.5 k ohm @ 1kHz Signal-to-noise ratio: 60dB (1kHz @ 1Pa) Dynamic range: 66dB Power supply: 1.5V DC; AAA size battery (not included) Max. SPL: 100dB Battery current drain: 0.5mA Battery life: 400 hours with Alkaline battery Weight w/o battery: 1.83 ounces Dimensions: 7-inch length, 0.7-inch diameter Output cable: Permanently attached with 3.5mm plug What's in the Box SMX-10 microphone (with attached cable), hot-shoe mic holder, foam windscreen

Features

• Ability to record directly in stereo Dual uni-directional electret condensor microphone Built-in cable with 3.5mm plug.
• Uses one AAA battery Includes windscreen and camera shoe-mount

Description

The pick-up pattern of the built-in microphone on camcorders is omni-directional, meaning that it picks up all sounds in every direction equally, no matter which direction you point the camcorder. The ECZ-990 is a 6" long directional, or "zoom" microphone with a super-cardioid pattern (ellipse shaped). It will pick up your subject's sound more clearly reducing side noises. With 2 positions, narrow and wider, the ECZ-990 has a range of 35 feet. Main FeaturesManufacturer: Azden CorporationManufacturer Part Number: ECZ990Manufacturer Website Address: www.azdencorp.comConnectivity Technology: Cable Microphone Technology: ElectretMicrophone Type: DetachableInterfaces: 1

Features

• Allows you to focus on subjects, reducing side noises
• 35-Inch range
• 150Hz-18kHz
• Uses 1 AA battery
• Includes wind screen and shoe mount

Description

The Audio Technica PRO 24-CM Stereo camcorder microphone is a lightweight, compact stereo condenser ideal for digital recording with high-fidelity stereo sound. Equipped with an accessory shoe and permanently attached coiled cable, the microphone features a pair of cardioid elements in an X-Y configuration to provide the spatial impact and realism of a live sound field. The microphone is designed for either battery operation or battery-free operation when used with camcorders that provide plug-in power at the mic input. Like all Audio-Technica mics, the PRO 24-CM is rugged; it’s built to endure the rigors of field production.

The PRO 24-CM camcorder microphone is a lightweight, compact stereo condenser ideal for digital recording with high-fidelity stereo sound. Equipped with an accessory shoe and permanently attached coiled cable, the microphone features a pair of cardioid elements in an X-Y configuration to provide the spatial impact and realism of a live sound field. The microphone is designed for either battery operation or battery-free operation when used with camcorders that provide plug-in power at the mic input. Like all Audio-Technica mics, the PRO 24-CM is rugged; it's built to endure the rigors of field production. A camcorder mic built to endure the rigors of field production. Click to enlarge. Includes foam windscreen. View polar pattern and frequency response. Click to enlarge. PRO 24-CM Features Stereo microphone designed to attach to a camcorder For camcorders with an accessory shoe and stereo microphone input Lightweight, portable design with rugged all-metal construction Pair of cardioid condenser elements provides spatial impact and high-fidelity stereo sound image Battery-free operation when used with recording devices that provide plug-in power at the mic input On/off switch for convenient operation Includes camera-mount, windscreen, battery and protective pouch Permanently attached 6-12-inch coiled cable with right-angle molded 3.5 mm stereo mini plug at output end Specifications Elements: Fixed-charge back plate permanently polarized condenser Polar Pattern: X/Y Stereo Frequency Response: 100-17,000 Hz Open Circuit Sensitivity: -50 dB (3.1 mV) re 1V at 1 Pa Impedance: 600 ohms Maximum Input Sound Level: 119 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range (Typical): 82 dB, 1 kHz at Max SPL Signal-to-Noise Ratio: 57 dB, 1 kHz at 1 Pa Power Requirements: 2-10V DC plug-in power Battery Type: 1.5V LR44 Battery Current / Life: 0.6 mA / 200 hours typical Switch: On/off Weight: 3.9 oz (111 g) Dimensions: 4.59" (116.5 mm) long, 0.83" (21.0 mm) maximum body diameter Output Connector: 3.5 mm stereo mini plug on cable Cable: Permanently attached 152.4 mm - 304.8 mm (6"-12") coiled cable with right-angle molded 3.5 mm stereo mini-plug at output end What's in the Box PRO 24-CM camcorder microphone, Video-camera shoe mount, LR44 battery, Windscreen, Soft protective pouch

Features

• Stereo microphone designed to attach to a camcorder
• For camcorders with an accessory shoe and stereo microphone input
• Lightweight, portable design with rugged all-metal construction
• Pair of cardioid condenser elements provides spatial impact and high-fidelity stereo sound image
• Battery-free operation when used with recording devices that provide plug-in power at the mic input

Description

The SGM-2X Professional Shotgun Microphone System is designed for both the Pro-Sound and Broadcast markets. The microphone comes with two barrels making it either an omni or by adding the extension barrel a supercardioid. The SGM-2X comes complete with a unique, integrated shock-mount with both camera shoe-mount and mic stand-mount and two foam windscreens. Main FeaturesManufacturer: Azden CorporationManufacturer Part Number: SGM-2XManufacturer Website Address: www.azdencorp.comConnectivity Technology: Cable Microphone Type: DetachableInterfaces: XLRDimensions: 15.75" Height x 0.83" Width - Long + Short Barrel, 8.37" Height x 0.83" Width - Short BarrelWeight: 6.5 oz - Weight Without Battery (Long + Short Barrel), 3.9 oz - Weight Without Battery (Short Barrel)

Features

• 2-barrel, 16" super-cardioid shotgun microphone
• XLR output
• Super-cardioid or omni pickup patterns
• Switchable low-cut filter
• Frequency response: 40Hz-20kHz